測量員英文自我評價（精選17篇）

測量員英文自我評價 篇1

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set rding to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision be sure to pay attention to the timeliness of the work.

測量員英文自我評價 篇2

Time off quickly, blink of an eye, I went to Hengyuan company project department, has more than six these days, success, failure, joy, and distress. In the leadership of the care and guidance, colleagues in the full support and help, my ability to work has been greatly improved.

From the unit, I know their own shortcomings and the direction of the effort, now in the project department engaged in the measurement of construction tests and so on. In addition to the work of the Ministry of Construction, , To learn more about my colleagues work knowledge and communication. I know that their experience and experience are inadequate, practice is also very flawed, but do not know I asked, and access to information and drawings, colleagues in the office and the leadership of the help, feel that they learned these days Many, every day is full. Now the work of these days to do a self-assessment.

1, 1, to study hard and continuously improve professional competence. At work, serious study of professional knowledge, practice and theory will be combined, continue to accumulate experience, a lot of professionals, technical staff advice, and constantly enrich themselves;

2, abide by the rules and regulations, these days, their work is not afraid of hardship, not afraid of tired, learning excellent staff approach, more to see more to listen to more questions, carefully to complete the construction test of the work tasks; , Unity of colleagues, work together, colleagues, harmonious relations, unity and fraternity, mutual help, mutual respect and understanding;

4, due to their lack of work experience in the work of the lack of practical experience, quality inspection work done inadequate, through the subsequent accumulation of learning and practice, and more to my colleagues to learn, this is my future work to make good efforts direction.

Second, the attitude in the professional, everyone has a motivated heart, I not only work for the company, working for the boss, I work for themselves, I believe they can do a very hot heart, a pair of very Hard - working hands. On the one hand I should not rigidly adhere to some things, to be good at breakthroughs, creative ideas, but also to the overall situation, the team as the most important, can not be too personal. And then later in the process of doing things to pay attention to the method, so as to make work more efficient and reduce unnecessary duplication of work, things will do better. In the professional field, I have been working in the project department of the company. With the help of my colleagues, I have gained more and more knowledge through professional efforts and work experience.

3, review these days, I seriously study the professional knowledge of road and bridge, study diligently, wholeheartedly, courteous, warm, patiently answer the problems in the work, and in practice to improve their quality and professional level, and strive to grow As a qualified Hengyuan employees. These days, let me on their own jobs and the company's advantages of resources, have a more profound understanding and understanding, which can be more quickly adapt to their jobs, give full play to their initiative, in the future work andLife, I believe that through their own efforts, in the future work, I will grow into a professional and responsible staff, to become the object of learning for others to contribute to the company. With the increase in their working days, to achieve their goals, reflecting the value of their lives, and the company grow together. I will use modest attitude and full of enthusiasm to do my job, create value for the company, with the company to look forward to a better future!

測量員英文自我評價 篇3

Two weeks of measurement practice, I got a more comprehensive, systematic exercise, but also learned a lot of books can not learn the knowledge and skills.

I remember the first week of internship, we are very excited, a week down we feel very relaxed, rest for two days, began measuring practice, I followed the teacher to find the control point, then everyone is still excited, that the next Of the week should also be very easy, it is ough a bit lucky, but we all learn a lot, only a lot of ordinary "a lot of shopping" to learn things. I like to think, like the summary, so I summed up the following points:

Grow up, to try to take some responsibility. We are born with a kind of inertia, whether individuals, or a team, if it is in an inert atmosphere, that she (people) efficiency will not be high, but if everyone has a strong sense of responsibility, Take some responsibility, then the efficiency is not only improved, and the task will be completed very well.

Infectivity is very important. In a team, in order to have a good atmosphere, the first person to put forward the idea of thinking is very important, because later people can not help but have a herd mentality. If he (she) the idea is positive, then someone will actively think of some problems. On the contrary, the whole team into a negative atmosphere. Therefore, each of us should actively think about the problem.

Think a lot. What is the internship, internship is the theoretical knowledge into their own knowledge of the process. Internship process only a lot of thinking, in order to digest a lot of knowledge, but also extends a lot of previously unknown. Teamwork, through thick and thin. This is a cliché, but in this practice have to mention, because it is everywhere, remember very clearly that many times we are on the measurement site for lunch; is that we all get up early, and then in the cold Whiz in the operation, everyone in the trembling; we are carrying the instrument touched the black home. All this bitter and happy, we all bear together. Through thick and thin, we are happy! Learn to compromise. Compromise is the highest art, in the process of cooperation, inevitably there will be some conflicts, then we need to calm down to think about the solution to the problem, everyone has done some concessions, then things are easy to the most "humble" work, tree arrogant self-esteem. A good team, everyone needs a little hard work, not afraid of dirty, not afraid of tired, rather than pushing three or four. Only everyone is actively doing everything, in order to achieve the purpose of the internship, so that everyone is familiar with every aspect.

To calm. Whether doing things or a man, we should learn to calmly face. Remember half of the picture, the teacher pointed out that we are wrong method of mapping, we have thought would be wrong; remember the distance with a tape measure we have thought about measuring only once. But in the end we did not do, now think of it, this is right! Frankly, is what we want life.

Internship is completed, the internship is the most unforgettable day of my life, very afraid of the beginning, and now want to come, the day is over, and can get good interns, so get a revelation: no matter what difficulties,Do not lose confidence in yourself.

測量員英文自我評價 篇4

This year is a special year for me, because I have the first formal job in my life. This is a starting point of my career, I also cherish, and do our best to do this ugh years of continuous learning and the help of colleagues and leaders, I have fully integrated into the family management department of the enterprise, the personal work skills have also been significantly improved, although a lot of things to be perfect, but it should be said that this Years to pay a lot, but also a lot of harvest, I feel growing, and gradually matured.

The work of the current year is summarized as follows:

First, in order to pragmatic work attitude, to adapt to the characteristics of the Department of Enterprise Management Department is the operation of the company is an important hub of the department, many of the work inside and outside the company coordination, communication, so the situation issued, and the planning and coordination of the various departments of the company Transaction. This determines the complexity of the work of the Office of the addition to their daily work, but also often have things outside the plan need to be dealt with temporarily, and usually more urgent, so I had to put down the work of the first to go to solve, of course, their own things on the lot, often busy One day, but every day is full, I am in the spirit of service for everyone to do a good job every thing. For the company to contribute my little light and heat.

Second, dedication, good job in the past year, I mainly completed the following work:

1, the company reimbursement of the cost of the audit: First of all departments designated personnel of the reimbursement department personnel occurred to the business management reviewers, business reviewers of the reimbursement of matters, the amount of bills and a series of issues audit; , Every Wednesday to the Department of Management leadership audit, leadership audit is completed, I entered the cost of registration software, and relatively special reimbursement to do other aspects of entry, and then by Zhang audit, Zhang audit is complete, and then re- To register all the reimbursement, do a detailed expense claim list, by the financial.

2, safe file management. The scope of such documents is very wide, the whole is divided into government, the company's internal; internal company is divided into all the certificate documents, contracts, agreements, administrative logistics. The need for an overall distinction to facilitate the various departments when needed, in a timely manner.

3, the completion of statistical reports and reported. I am a statistical report related to the Nanchang Economic and Technological Development Zone, Nanchang Economic and Trade Commission, Nanchang, key enterprise service platform network, the Office of Foreign Trade and Economic Development Office and other government fixed the corresponding government statements five large pieces. Part of the financial statements in coordination with the completion of the financial out of the corresponding data, some of the data need their own calculations, each large report related to more.

4, file this one, is to spend time, the most experienced one, which is divided into two blocks: paper files: all handwritten, everyone's files are written on personal information, I took over this one completely Is blank; and also sub-sectors, the statistics of the number of departments in the above list. In such an effective classification, the company all personnel information may be very intuitive to find. Electronic file: This is a paper file is another presentation, is the basic personal information on the entry of employees, such as: name, ID card, graduation school and a series of. Involving very fine. Such a record and the way to facilitate the leadership of the company's basic personal information on the staff view.

5, the company seal the custody of India and the use of registration of the situation. All departments with the printed application form, the leadership of the signature, until I review, only to be sealed. And monthly order all printed with a single application, and input to the computer to facilitate the leadership of a certain period of time with the Indian situation of the audit.

6, the reception of foreign guests. Companies to visit the guests more often need to accompany them to the workshop, explain the company to its corresponding situation, a series of questions for the guests to answer; also ready the conference room, put the information, pour water and other matters.

7, the relevant government documents, matters of treatment. This year under the guidance of Mr. Chen, dealing with two major items: First, the company EIA documents, the second is the company's internal solid waste disposal. The two blocks in the coordination of the parties, and finally the perfect completion. The next step is the work of some of the thread. Of course, some corresponding government similar documents have also been processed.

Personal feeling this year, their growth is great, and soon. Write this summary, hope you verify the leadership.

測量員英文自我評價 篇5

As an accountant, in all aspects of business are careful about, patience, enthusiasm. Since the work, due to their continuous efforts, in all respects have made great progress. Work is also a successful completion, and now the individual identification is as follows:

First, have good work skills

Cashier external units more settlement, is an image window; internal is a service window, internal staff reimbursement is frequent, is a masters. So I have to do is not confused, tickets on the spot error-free, inventory cash fast and accurate, not only to grasp the financial policy, dry up the work also handy, have strong operational capacity, plans, computer, Money everything is accurate, busy and not chaos.

Second, the sense of innovation

In the eyes of many people is a major invention of innovation is what, it is not true, as long as the actual work from the start, to improve the actual work, to promote practical work to a new level, is innovation. I have this spirit. I work for the staff reimbursement of travel expenses reimbursement and the original invoice paste sheet, are made through my reasonable proposals after the improvement of the voucher paper size selection, the original document paste single filling format, the original paste single Requirements of the content design, font layout requirements, the back of the original paste paste the attention of managers, not only to improve the work, more importantly, is to put the accounting file binding and management.

Third, there is a responsible attitude

1, the strict implementation of cash management and settlement system, regular checks to the accounting cash and accounts and found that the amount of cash does not match, so that timely treatment.

2, the timely recovery of the company's income, out of receipts, cash withdrawals in time to the bank, never sit cash.

3, according to the basis for providing accounting, teaching staff wages and other timely payment of funds to be paid. I am hard working, willing to endure hardship, willing to sacrifice. This year, due to the overall relocation and standardization of the basis of accounting rectification work, the intensity and difficulty of financial work has increased. In addition to complete the reimbursement work, I also take care of Corey's back office work and other business. In order to complete the task according to the quality and quantity, I do not care about personal gains and losses, not pay, sacrifice personal interests, often work overtime. In work to develop willing to endure hardship, willing to sacrifice the spirit of the work can always be hard working, conscientious. In the completion of the task of reimbursement, taking into account the back office, do a good job budget, the management of labor camp deposits, excellent work to complete the task, played a role in advanced and role models.

測量員英文自我評價 篇6

In the past year, as a team leader, deeply feel themselves shoulder the workshop production and team members safe sustenance and year through the study of the company and plant, workshop production line and general manager of the 36-word approach, quality and efficiency strategies, a profound understanding of "quality and efficiency" of the importance. According to the safety and production tasks put forward at the beginning of the year by the branch and workshop, we should work together with the whole class to work out the situation, clarify the target and implement the plan in light of the reality. Dedication and consciously engaged in work practice for the full completion of the production tasks, to achieve the safe operation of the team year to do their due obligations. In the team and all the staff working life, although busy, but always maintain a sense of balance, always remember that he is a leader of the soldiers.

The head of the team is a locomotive, is a great responsibility, how to really see the safe operation of the road and ensure the safety of passengers on the car to reach their destination is their duty, so the team leader is a special soldier. They must understand the knowledge business, but also good s of work practice to make their own touch a superficial rules: as long as the spirit of the upper class, eyes down, mind the whole class, combined with the actual conditions, we can find work ideas, and then progressive, drive overall.

Therefore, starting from the important post, the master is a special post, job uncertainties, random strong, to do a good job in the production team and even the overall work, you must operate from the master and master control, the master operating time and on-site operationPersonnel management, and do a good job between the convergence and cooperation with each other, so that the next line, twisted into a strong, so that the master play a central control role.

With a certain way of thinking, in the specific operation and focus on the following two aspects: First, try to create harmony without losing the principle of good atmosphere, creating a harmonious and relaxed working environment; Second, the team members to play the initiative and ownership, A high degree of democratic management team. Improve the team leader as the core, the four members of the backbone of the management system, so that everything was tube, everything was done, clear responsibility for all responsibilities, give full play to each employee's enthusiasm and creativity, and strictly enforce the team A series of rules and regulations, so that everyone is equal before the system. Strengthen team members self-management awareness, to a certain extent, to maximize its own energy, in the team-based management system, self-examination, self-control, self-evaluation, the class staff to establish a strong sense of responsibility and mission. In this way, a solid foundation for team management, and all aspects of work will have a guarantee. From the situation throughout the year, the results are obvious. To do a good job in the overall work group, relying on the joint efforts of all staff, but to give full play to the enthusiasm of each group of workers must have a good image of the class leader, as a group of long, both producers, but also Unnamed managers, I always clear that only by setting an example, take the lead, the staff can trust, listen to, Qi efforts. Ask yourself to complete the task, his first completed, put their own image in the team, with their own practical actions to influence the team members, and to drive them to do so.

In view of this year's production situation, the steel situation is grim, the company proposed quality and efficiency initiatives, the timely organization of the class to carry out "quality and efficiency" and "back to the big debate" activities, and the class talk about feelings, To analyze the team in the "quality and efficiency" work and safety problems, combined with the actual work team developed effective preventive measures, and through the corresponding system to ensure that the security situation throughout the year and stable development, quality and efficiency Work carried out smoothly and orderly.

This year, the production tasks and all aspects of work is indeed busy at the end of the year due to 2 and 3 kiln kiln kiln a single high pressure, lime abnormal quality fluctuations, etc., team actively with the workshop leading to the production site careful analysis, inspection at the same time , And according to the specific circumstances of decomposition to each device point, each process, each person, and dynamically adjust the output of each class. Other team members also take into account the overall situation, selfless dedication, as long as the teams need to meet the call, and some employees returned to the team put forward a series of personal analysis of data and personal opinion, these are indeed commendable.

測量員英文自我評價 篇7

leted all the courses in the specialized field, obtaining good command of theoretic knowledge and experimental and DIY skill; Very adaptable and Good at leaning.

ng played a couple important roles in the student organizations, honing the interpersonal communication skills and organizational capability.

-going and congenial, with a strong sense of responsibility and good team-spirit.

ng a wide range of hobbies, including oral English, music, movies and literature .

nt in oral English , with fairly good of reading and writing ability; Speaking authentic Mandarin-Chinese.

command of Computer skills: familiar with different versions of Windows OS and Office application software, able to program with C and Fortran languages, obtained some experience and understanding about other widely-used software like Autocad, Photoshop, Coreldraw and Dreamweaver.

測量員英文自我評價 篇8

101 middle school has its strict school rules and discipline, the purpose is to let us become a good moral character and good students. I have been very loose in the junior high school period, but in 101 after I realized that as a student should have the character, from school to now, I have been strict self-discipline, abide by school rules and regulations, actively take the initiative for the school, To do a compliance 101 people.

I love the motherland in school, respect teachers, unite students, helpful, is a good helper teacher, the students good friends. I study diligently, positive, like and students to discuss and solve problems, often participate in class school organization of various inside and outside activities.

Of course, I also deeply aware of their own deficiencies, the word is not very good to write, and sometimes things will be only three minutes of enthusiasm, I believe that as long as overcome these problems, I can do better.

I can consciously abide by the rules of secondary school students, and actively participate in various activities, respect teachers, and students live in harmony, love and love the collective, willing to help others, labor actively and willingly, consciously exercise, and often participate in and organize class school organization of various classes activity.

I have good character, cheerful, love life, have a strong practical ability and organizational skills.

測量員英文自我評價 篇9

I warm and cheerful personality, friendly, honest and humble. Hard-working, serious and responsible, hard working, conscientious, patient. Affinity, approachable, good communication. Study hard seriously, with outstanding results. Actively participate in extracurricular sports activities, a variety of social practice and part-time work, in order to increase their experience and improve their capabilities. Experience in the way things work, exercise eloquence and interpersonal skills. In normal school life, I have done a lot of part-time. For example: tutoring, telephone interviewers, restaurant waiters, leaflets, questionnaires, also played summer jobs to the plant, to experience a different way of doing things and the various operational procedures work, exercise has become a hard-working spirit, and from work to appreciate the joy and dedication.

測量員英文自我評價 篇10

Since July 21 joined Road Equity Investment Fund Management Co., Ltd., with the leadership and colleagues in the company's teaching, training and help, making me in the ideological, work, study all aspects have been improved to varying degrees. Some of the previous work experience and school-related exercise in the work I have engaged in this now have some help, but many things need to re-understand and experience. Learning and practice can produce results of mutual integration, which are inseparable from the patient leadership unit of instruction and intangible body and mind, which I sincerely express my gratitude. Now my probation period since the relevant work summary is as follows:

1. Reimbursement: in strict accordance with the requirements of the financial system, handling expenses reimbursement matters, handling cash, online banking, check the receipt and payment business, so that the cash Nissin statements, reimbursement accurate, and special circumstances, special treatment.

2. Software accounting: timely registration in the financial software, cash, bank accounts, accurate receipt and payment, and regular checks with bank accounts.

3. Statement: according to the weekly capital statements, according to the needs of the preparation of balance sheet.

4. Cash, bills, check and document management: cash and notes management properly, perfect, notes and documents received in time registration, so that evidence to follow.

5. Payroll: the monthly payment of wages in a timely manner and accurate.

6. Banks matters: the daily banking business, mainly including the use of reserve funds, bank account opening, financial products to purchase, the public private money receipt and payment, the end of the month and the beginning of bank statements print, bulk card, credit card And so on with the bank docking matters.

7. Fixed asset management: do software card entry timely, accurate, when the physical inventory inventory, and regular inventory.

8. Financial-related system modification, layout, according to the company's financial system documentation, the production of financial expenses reimbursement process (visio diagram) and the corresponding PPT.

9. According to the business center needs, leadership requirements, collect and organize the financial analysis of the data required to produce the appropriate chart and formatting.

10. Timely and efficient completion of the leadership of the other tasks, to help other departments do the relevant financial work.

After three months of probation, I learned a lot at work. Financial cashier work seems to be simple, but it needs to do a lot of careful and patience, but also need to be cautious. For each sum of money for reimbursement, carefully, strictly in accordance with the company's financial system, and in accordance with the procedures for the implementation, in case of special circumstances are special treatment to ensure the normal operation of the company. To make cashier work can not use the "easy" to describe, it is the first line of financial work, financial revenue and expenditure of the juncture in the company's management plays an important role. As a qualified cashier, must have the following basic requirements: First, learn, understand and master the policies and regulations and company system, and constantly improve their level of business and knowledge and skills. Then, cashier personnel to abide by the good professional ethics. Second, the cashier must have a strong sense of security, cash, notes, all kinds of seals, it is necessary to have the internal custody of the division of responsibility, but also to contain each lly, good communication skills, especially for others to explain or convey the relevant financial matters, good communication and expression can reduce the number of unnecessary unnecessary misunderstanding, greatly improve efficiency. Of course, in many ways, due to their professional knowledge, ability limitations, there are still some deficiencies in the future work in addition to abide by the above basic four points, I will continue to study hard to improve their professional skills, To adapt to the changing social environment and future work carried out by the company, with the times.

These are my three months of this work I have some experience and summary. In the future work and study I will make unremitting efforts to do their own work, and the road with the company's development in sync. At the same time actively assist others, the common development for the company. I sincerely thank the company leaders and colleagues for their support and concern in their work and life. I also earnestly ask the leaders of the company to give me a chance to continue to exercise and realize the ideal. I will use modest attitude and full of enthusiasm to do my own work, create value for the company at the same time, so that their own towards a higher level.

測量員英文自我評價 篇11

(1) Working advantages: rich work experience, worked Architectural Design Institute, landscape planning and design company, design company planning, construction design company. Although a few years time scattered in different areas of the company work, professional learning, work intermittent, but I have a strong self-learning ability, through the various stages of self-learning has been basically able to various professional mastery, I am eager to present there is a more challenging job for the company and contribute to society while making their own personal get faster and better development. Expertise skills: proficiency in the use of various applications: Tengen, WORD, 3DMAX, AUTOCAD, PHOTOSHOP.

(2) My expertise and special skills: proficient in most design software, such as:. oshop have excellent modeling capabilities skuchup good drawing skill. Creative, learning ability, good

(3) in the real estate institute's work, from design to completion of construction drawings, renderings and the company's cooperation with the structure, water, heating, electricity run-professional coordination. I understand not only the completion of the entire cycle of building products, building products from concept through how each process into finished products. Also I learned to work effectively with the different departments in different professions, different ways of working people. Work in the real estate institute and keeps me in contact with the developers, to understand, negotiate, understand their commercial intent; to make their own construction industry has a new expansion.

(4) the last three years are engaged in preliminary design and construction design work, I am very interested in this work. Their advantages: high efficiency, able to adapt to the large workload; the project has a certain depth of the overall understanding of the project has a good degree of certainty, and has a good ability to work coordinated with the professional (own times any professional person in charge of the project). Temper after nearly six years of work, I believe my ability to give the company a surprise! I believe the company's vision, and I believe the company will gain a satisfactory answer!

(5) in childhood stacked wood in the game, to find out the direction of the efforts of this life and choose the architecture profession, he decided to fight for its flourishing. In the last semester internship choose this way to enrich themselves, and I want this time to experience the fun of working. I am a super optimist, enjoy life in every drop of each point, my motto: smiling face every day. All the things around him have a strong curiosity, childhood is a famous hundred thousand why. Although their expertise is still shallow, but I will strive for a better tomorrow, we hope to have the opportunity to join your company's professional team, but also hope for this strong team to contribute their part.

(1)工作優勢：工作經驗比較豐富，曾任職建築設計院、景觀規劃設計公司、策劃設計公司、施工圖設計公司。雖然幾年的時間分散在不同領域公司中工作，各專業的學習、工作時斷時續，但是本人自學能力較強，經過各個階段的自我學習已基本能夠將各個專業融會貫通，目前本人迫切希望能有一個較有挑戰性的工作崗位，爲公司以及社會做貢獻的同時使自己個人得到更快更好的發展。專長技能:熟練運用各種應用程序：天正、WORD、3DMAX、AUTOCAD、PHOTOSHOP。

(2)我的專長和特殊技能：精通大多設計軟件如：oshop.有非常優秀的skuchup建模能力. 良好的手繪能力。富於創意，學習能力，有良

好的團隊合作精神。

(3)在地產設計院的工作中，從方案設計到施工圖的完成，與效果圖公司的合作與結構、水、暖、電專業的磨合協調。不但使我深入瞭解建築產品完成的整個週期，建築產品如何從一個概念經歷各個過程成爲成品。也學會了與不同專業不同部門，不同工作方式人的有效合作。在地產設計院工作又使我不斷與開發商接觸，瞭解，談判，瞭解他們的商業意圖;使自己對建築這個行業又有了新的拓展。

(4)近三年都在從事初步設計與施工圖設計工作，我非常愛好這一工作。自己的優勢在於：工作效率高，能適應大工作量;對工程擁有一定深度的總體認識，對項目具有較好的把握度，並具有很好的與各專業相互協調的工作能力(自己多次在項目中任專業負責人)。 經過近六年的工作錘鍊，我相信自己的能力會給公司帶來驚喜! 我相信公司的眼光，同時相信公司會收穫滿意的答卷!

(5)在幼時堆積木的遊戲中，尋找到了此生所努力的方向，選擇了建築學這個專業，就決定爲了它的興盛而奮鬥。在最後一個學期選擇實習這個方式來充實自己，也想這段時間裏體驗工作的樂趣。我是個超級樂天派，享受生活中的每一點每一滴，我的座右銘：微笑面對每一天。對身邊的所有事物都有強烈的好奇心，從小就是個出名的十萬個爲什麼。雖然自己的專業知識還很淺薄，但我會爲了更好的明天爲之奮鬥，希望能有機會加入貴公司的專業團隊，同時也希望能爲這個強大的團隊貢獻出自己的一份力量。

測量員英文自我評價 篇12

Today, although the last day of training, but the mood was like the weather at this time, happiness and happiness in the rising temperature. Today's lecture is still very exciting, today's harvest the most shocking. I will remember these "shock":

1. Evaluation is not simply to assess how much knowledge students have, remember how much knowledge, but to evaluate what can be done with this knowledge and in the process of learning knowledge, emotions, learning strategies such as changes and improvements.

2. The new curriculum emphasizes that evaluation should be combined with formative and final evaluation to increase the dimension of evaluation, not only pay attention to the learning process, but also pay attention to learning results, and strive to reflect the curriculum content "people-oriented" core idea

In the evaluation, we should respect the needs of students and the law of physical and mental development, respect the students' emotions, pay attention to mobilize the enthusiasm of students, on the basis of research, design, implementation is the deep meaning of the student body.

We should take into account the age, psychological characteristics and cognitive level of students according to the characteristics of each stage of teaching and evaluation purposes, choose reasonable and diverse evaluation methods such as self-evaluation, peer evaluation, parental evaluation, teacher evaluation, ative and summative evaluation.

Such as: language performance (role-playing, recitation recitation, chart presentation, project research, experimental reports, classroom teaching evaluation, etc.), observation and analysis records (student performance records, student reflection, activity overall performance, student growth record bags) Interpersonal communication (interview, individual conversation, group discussion, speech debate, etc.), testability evaluation (standardized test, stage test, unit test, random test, etc.).

5. Formative evaluation principles are: incentive principle (to make students like the evaluation, so that students experience

(Students are the main body of learning and evaluation of the main, to encourage students to actively take the initiative to evaluate their own learning and reflection), students participate in classroom activities is the formative evaluation of the situation, Formative evaluation and teaching are closely related and diverse, and can be "test and non-test, teacher evaluation, student self-evaluation and student mutual evaluation of the combination of" and so on.

6. Language teaching is not with reading a few words, analyze a few sentence structure, explain a few grammar tense

Can work. We should be in a certain period of time, such as the first stage, leading students to learn how to evaluate their own learning interest, how to use the portfolio to evaluate themselves.

測量員英文自我評價 篇13

High the next semester of life has officially opened the curtain. I want to combine the recent situation in the development of a learning goal: first, reasonable time, adjust the schedule, assign good learning, work, entertainment time. Second, the quality and quantity to complete the assignment of the teacher, the teacher assignments are generally her years of teaching experience in the summary, with high value, ... ... earnestly take the exam, exam carefully reviewed. In addition, actively read the books and information, to expand their knowledge; often ask questions, discuss with students, to seize the time to learn some other areas of professional knowledge, knowledge is always useful.

I am in this semester, has been to comply with the rules and regulations of the school, has a good ideological and moral qualities, all aspects of outstanding performance, a strong sense of collective honor and sense of responsibility, adhere to the principle of seeking truth from facts.

In learning, I study the correct attitude, good use of reference and use of scientific learning methods, while focusing on independent thinking, the courage to explore.

On the moral character, I have a good moral cultivation, and a firm political direction. I love the motherland, love the people, firmly support the leadership of the Communist Party and the socialist system, abide by the law, love public property, unite students, helpful and pragmatic spirit, enthusiastic participation in school public service and patriotic activities.

In my spare time, I actively participate in physical exercise, dedicated to the construction of class services, and conscientiously perform the duties of the student union cadres, school life for the rich and colorful, pay attention to personal all-round development.

測量員英文自我評價 篇14

I am a strong ability to work independently of the people. Work carefully, not in haste, with a strong sense of responsibility and professionalism, like continuous learning and exploration at work, a strong ability to adapt to the new environment.

測量員英文自我評價 篇15

I was on March 14, 20xx the company became a probation staff, and now one month trial period has expired, according to the company's rules and regulations now apply for full-time employees into the company.

Companies harmonious working atmosphere relaxed, united and progressive spirit of enterprise, let me quickly like on the job. Meanwhile, the company leadership and colleagues selfless help and guidance of patience, so I in a short period of time to adapt to the company's work environment, but also familiar with the process draftsman for the future can be quickly started work to lay the foundation.

Summary month work: Busy With full, along with learning gains. Under Jiang Jingli careful cultivation, I learned from some of the most basic proofreading start, the sense of learning, step by step forward, and now has been able to complete some independent drawing drawings, 3D mapping and 3D to 2D engineering FIG conversion. Previously not very skilled UG software has made great progress in this month's use of learning; for PRESSCAD previous month by not very deep understanding of learning can be proficient. Itself to greatly improve the technical level.

For three months I learned a lot, a lot of sentiment; see the company's rapid development and bright future, I feel proud, but also as a more urgent want a full-time staff here work to achieve their own struggle target, reflecting the value of your life, and grow with the company. Here, I propose regularization application, I continue to urge leaders to exercise their own, to achieve the ideal opportunity. I will humble attitude and enthusiasm to do my job, to create value for the company, together with the company's vision of a better future!

我於20xx年03月14日成爲公司一名試用員工，到現在一個月試用期已滿，根據公司的規章制度，現申請轉爲公司正式員工。

公司寬鬆融洽的工作氛圍、團結向上的企業精神，讓我很快喜歡上了這份工作。同時，公司領導及同事無私幫助和耐心指導，使我在較短的時間內適應了公司的工作環境，也熟悉了繪圖員的流程，爲以後能快速地上手工作打下了基礎。

總結一個月的工作：忙碌伴隨着充實，學習伴隨着收穫。在蔣經理悉心的培養下，我從最基本的一些校對工作做起，踏踏實實的學習，一步一個腳印的前進，到現在已經能夠獨立完成一些圖紙的繪製、3D圖繪製以及3D到2D工程圖的轉換。以前不是很熟練的UG軟件在這一個月的運用學習中有很大的進步;以前對PRESSCAD瞭解不是很深通過一個月的學習可以熟練應用。自身技術水平的到極大地提高。

這三個月來我學到了很多，感悟了很多;看到公司的迅速發展和美好前景，我感到驕傲和自豪，也更加迫切的希望以一名正式員工的身份在這裏工作，實現自己的奮鬥目標，體現自己的人生價值，和公司一起成長。在此我提出轉正申請，懇請領導給我繼續鍛鍊自己、實現理想的機會。我會用謙虛的態度和飽滿的熱情做好我的本職工作，爲公司創造價值，同公司一起展望美好的未來!

測量員英文自我評價 篇16

I cheerful personality, stable, vibrant, warm and others, in good faith. A serious and responsible work, take the initiative to hard-working. strong organizational capabilities, hands-on practical ability and collaborative spirit of the group, quickly adapt to the environment and integration of them.

測量員英文自我評價 篇17

You work carefully, writing neat. Study hard, results have improved. But the whole point of view, the subjects are not very prominent. I hope you find their own reasons, pay attention to actively use their brains, active thinking, and constantly improve their learning methods, improve learning efficiency, strive for greater progress. As long as you can make unremitting efforts to study, your grades will improve, I will be confidently waiting for the day.

You lively and cheerful personality, respect for teachers, unite students, courteous, to humbly accept the teacher's teaching, and consciously abide by the school rules school discipline. Actively participate in various activities, from all aspects of continuous enrichment, improve themselves, for the future to lay a solid foundation. The results on the rise, if the study can be hard on a bit, there are difficulties in the determination, will be able to score on the new breakthrough.

You are one of the larger students in the class, the basic class can be active and active brain, active speaking, ability to accept and respond faster, but the recitation task vacancies, which will make your basic skills is not hard enough. I hope in the future to learn more hard and practical, to explore scientific learning methods, to determine a competitor, catch up, as long as you have the determination, the teacher believes you will be better.

You are considerate, enthusiastic to help people in difficulties, you are very diligent, learning is always meticulous, seriously, but your academic performance is not outstanding. As the saying goes that the world is not difficult, I'm afraid people, I believe, as long as you adhere to the learning attitude, change the learning methods, academic performance will certainly be substantial progress! Believe it?

You are a good teacher, unity and good students. Can consciously abide by the rules and regulations of the school, and consciously resist all kinds of bad s can concentrate on listening, do a good job of notes, after school hours to complete homework. Study hard, results have improved. On duty work seriously responsible. I hope that in the future can maintain the achievements have been made, continue to strive for better.

You respect teachers, unite students, the class responsible for the work. But after school discipline relaxation, academic performance has recently declined, I believe that as long as you get rid of bad habits, and constantly improve the learning method, the scientific allocation of learning time, subjects can be balanced development. You have to remember that "Shushan there is a road for the trail, learn the sea without boundaries bitter boat."

You are motivated, is an obedient sensible, considerate, honest and simple good students. Work, you actively work hard, not afraid of suffering, not afraid of ning hard, positive thinking, do not understand the experience to the teacher to ask, to complete the work. I hope you can strengthen confidence, perseverance, courage and courage, and constantly improve the learning method, for a breakthrough in academic performance.